Products from AMX

NI-3100/256 (price: 2 540,00 €, VAT excluded)


With the ability to integrate a large number of devices, the NI-3100 controls a wide variety of components including audio/video conferencing, projectors, DVD and Blu-Ray players, lights, thermostats and other electronic equipment found in larger areas. With these technology-driven environments, the NI-3100 also provides solutions for future expansion and enables the addition of more devices and control capabilities. Offers higher performance with an ultra-fast processor, 64MB of onboard RAM and is AMX Device Discovery enabled.

The NI-3100 unit is ideally suited to the requirements of larger areas or multiple rooms with advanced control and automation features.


  • 7 Configurable RS-232 / RS-422 / RS-485 Serial ports
  • 8 Relays
  • 8 IR / Serial ports
  • 8 Digital I/O ports
  • 2 Communication Networks: AxLink and Ethernet (TCP/IP)
  • 404 MIPS processor speed
  • 64 MB RAM or 256 MB RAM
  • 2 GB CompactFlash (upgradeable to 4 GB)
  • 1 MB Non-Volatile Memory
  • AMX Device Discovery enabled
  • JITC Compliant



  • 3 1/2" x 17" x 3 1/2" (8.8 cm x 43.2 cm x 8.8 cm)
  • RU: 2

4.55 lbs (2.06 kg)

900 mA @ 12 VDC

Metal with black matte finish


  • 64 MB SDRAM (FG2105-05 & FG2105-15
  • 256 MB RAM (FG2105-25 & FG2105-35)
  • 1 MB of Non-volatile SRAM

2 GB Compact Flash (upgradeable to 4 GB factory programmed)

404 MIPS

FCC Part 15 Class B, CE, and IEC 60950


  • Status: Green LED blinks to indicate that the system is programmed and communicating properly
  • Output: Red LED blinks when the Controller transmits data, sets channels and sends data strings, etc.
  • Input: Yellow LED blinks when the Controller receives data from button pushes, strings, commands, channel levels, etc.
  • RS-232/422/485 LEDs
  • Relay LEDs
  • IR/Serial LEDs
  • I/O LEDs
  • Rack-mount brackets: Provides an installation option for the Integrated Controller to be mounted into an equipment rack, when used with the Installation Kit (KA2105-01)


  • RS-232/422/485 (Ports 1 - 7)
  • ICSNet: Two RJ-45 connectors for ICSNet interface (provided by ICSNet daughter card)
  • ICSHub Out: RJ-45 connector provides data to a Hub connected to the Controller (provided by ICSNet daughter card)
  • Relay (Port 8)
  • Digital I/O (Port 17)
  • IR/Serial (Ports 9-16)
  • Program Port
  • Configuration DIP Switch: Sets the communication parameters for the Program port
  • ID Pushbutton
  • Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
  • AxLink LED
  • AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data and power to external control devices
  • Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector


  • Operating Temperature: 0° C (32° F) to 50° C (122° F)
  • Operating Humidity: 20% to 85% RH
  • Heat Dissipation (Typical): 36.9 BTU/hr


  • 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
  • 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
  • 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
  • Two 8-pin 3.5 mm mini-Phoenix female Relay connectors (41-5083)
  • Two CC-NIRC IR Emitters
  • Two removable rack ears (62-2105-06)


(Click here for larger PDF image) 


    Price: 2 540,00 €, VAT excluded.


Created by Digiart