Switchers

Atlona AT-PROHD44M-SR (price: 2 521,00 €, VAT excluded)

ATLONA 4x4 HDMI MATRIX SWITCH WITH 4x CAT5 RECEIVERS INCLUDED AND 3D SUPPORT

MODEL: AT-PROHD44M-SR

3D enabled Compare HDMI Matrix Switchers

Atlona Technologies AT-PROHD44M-SR is a 4x4 HDMI Matrix Switcher over Twisted Pair designed to work as a switcher for multiple Audio/Video sources and displays. The unit is capable of switching HDMI signals between four sources (such as: BluRay player, HD set top boxes, game systems, etc.) and four displays.Because it is a matrix switch, any or all of the 4 inputs can simultaneously be switched to any or all of the outputs. Along with supporting HDMI 1.3 and HDCP Compliance, this switcher will support high definition video in multiple resolutions up to 1080p or 1920x1200 and 3D. Five switching modes are available including front panel buttons, local IR, IR call back from remote locations, RS485 and TCP/IP. The AT-PROHD44M-SR is capable of routing IR signals from remote locations to the main location where the switcher is. The IR emitters/receivers can control the switch as well as sources next to it. The Atlona AT-PROHD44M-SR has 4 dual outputs.*

*Dual Output: HDMI + Dual Twisted Pair output where both are active at the same time. Each output could be connected to either 2 displays or an AVR and a Display; however the signal from both outputs will be identical.

Note1: The AT-PROHD44M-SR comes with 4 x Receiver modules, there is no need to purchase additional hardware

Note2: The AT-PROHD44M-SR is able to work on a single CAT5/6/7 cable; however special software is required (The IR pass-through will no longer work in this case). Please download instructions.

Matrix Switcher Comparison

Key Features:

3D Capable
HDMI 1.3b, HDCP and EDID compatible
4 x CAT5/6/7 receivers are included
Allows up to four HDMI sources to be independently switched to four HDMI outputs, where each output is featured with HDMI and Twisted pair connections and both are active at the same time
The four outputs can show the same or different sources simultaneously
Supports high definition resolutions up to 1920x1200 or 1080p
Supports all latest HDMI audio formats including Dolby TrueHD and DTS-HD
Switcher is featured with IR call back function which allows each remote location to send IR signals through CAT5/6/7 receivers back to the switch and further down to the nearby sources
Each CAT5/6/7 output can go up to 165ft @ 1080p on CAT5/6 cables and up to 250ft @ 1080p on the CAT7 cable (tested with Tyco wire). If more distance is required, Atlona offers CAT5/6/7 repeater unit which can double the distance and allow chain up to 6 units
Each input and output port is able to support HDMI or DVI signal. For DVI signal adapter will be required
Six switching modes: panel buttons, local IR, IR call back from remote locations, RS485, RS232and TCP/IP.
Rack Mountable, comes with 19-inch Rack-Ears

Technical Specifications:

Video Formats Supported: HDTV: 480p/576p/720p/1080i/1080p (50/60Hz)
Computer: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200 and many others (use EDID learning function to pass other resolutions)
Audio Format Supported: All latest HDMI audio formats including Dolby TrueHD and DTS-HD
HDMI Video Format: HDMI 1.3
Maximum Output Distance (HDMI Outputs): 55ft
Maximum Output Distance (RJ45 Outputs): 165ft @ 1080p on CAT5/6 cables and up to 250ft @ 1080p on the CAT7 cable (Tested with Tyco wire)
Dimensions (inch): 17.3’’L×7.9’’W×1.7’’H – 1U
Main Unit Weight/Receiver: 6.5LB/0.3LB
Input DDC Signal: 12v/4A (main unit) and 5v/1A (receivers)
Power Consumption: 30W
Operating Temperature Range: -5 to +35°C (-41 to +95 °F)
Operating Humidity Range: 5 to 90 % RH (no condensation)
Input Video Signal: 0.5-1.0 volts p-p