NetLinx Integrated Controllers
NI-700 (price: 955,00 €, VAT excluded)
OVERVIEW
The NI-700 unit is geared to meet the specific control and automation needs of a single room environment, in which both price and functionality are the driving requirements. The NI-700 is configured to control a limited number of video players, projectors, lights, thermostats, and other electronic equipment.
COMMON APPLICATION
Ideal for single-room environments with a limited number of devices such as classrooms, conference rooms, hotel rooms and other applications.
FEATURES
- Ultra-fast 304 MIPS processor
- 2 Configurable RS-232 / RS-422 / RS-485 Serial Ports
- 1 IR/Serial Port
- 1 IR Receiver Port
- 4 Digital I/O Channels
- 1 Ethernet 10/100 Port
- 1 AxLink Connector
- 64 MB RAM
- 32 MB Flash Memory
- 512 KB Non-Volatile Memory
- AMX Device Discovery enabled
- JITC Compliant
SPECIFICATIONS
DIMENSIONS (HWD)
- 1 9/16" x 5 9/16" x 5 1/8" (4.01 cm x 14.10 cm x 13.00 cm)
- RU: 1
WEIGHT
1.30 lbs (590 g)
POWER
- 280 mA @ 12 VDC
- Power requirements are usage dependant
ENCLOSURE
Metal with black matte finish
ONBOARD MASTER
304 MIPS
CERTIFICATIONS
FCC Part 15 Class B, CE, and IEC 60950
FRONT PANEL COMPONENTS
- Program Port
- Configuration DIP Switch: Sets the communication parameters for the Program port
- IR RX LED: Red LED lights when IR data is being received via the rear IR RX port
- IR LED: Red LED lights during the transmission of IR or Serial data via the rear IR port
- I/O LEDs: Four yellow LEDs light when the rear I/O channels 1 - 4 are active. LED indicator for each I/O port reflects the state of that particular port
- Serial LEDs
- LINK/ACT: Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
- Status: Green LED lights when the Controller is programmed and communicating properly
- Output: Red LED lights when the Controller transmits data, sets channels sends data strings, etc.
- Input: Yellow LED lights when the Controller receives data from button pushes, strings, commands, channel levels, etc.
- ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
REAR PANEL CONNECTORS
- RS-232/422/485 (Ports 1 & 2)
- IR RX (Port 5)
- Digital I/O (Port 4)
- IR/Serial (Port 3)
- AxLink LED
- AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to external control devices
- Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
- Power Port
ENVIRONMENTAL
- Operating Temperature: 0° C (32° F) to 50° C (122° F)
- Operating Humidity: 20% to 85% RH
- Heat Dissipation (Typical): 11.5 BTU/hr
INCLUDED ACCESSORIES
- 2-pin 3.5 mm mini-Phoenix female PWR connector (41-5025)
- 4-pin 3.5 mm mini-Phoenix female connector (41-5047)
- 6-pin 3.5 mm mini-Phoenix female I/O connector (41-5063)
- CC-NIRC IR Emitter
(Click here for larger PDF image)
-
Price: 955,00 €, VAT excluded.
Product Request
06.02.2012Back