Products from AMX

EXB-IRS4 (price: 600,00 €, VAT excluded)


ICSLan Device Control Boxes allow users to manage devices remotely from a Controller over an Ethernet network. This provides a beautifully simple method for a centralized control environment allowing users to share a controller among multiple smaller rooms versus controllers in every room. Ethernet has become the industry standard for connecting devices and the ICSLan Device Control Boxes make it easy to introduce control to equipment such as projectors located extended distances from a Controller. Additionally, the number of ports on an AMX Controller can be expanded when all ports are fully populated. Because they employ Native NetLinx technology, it is extremely simple to add an EXB to an AMX installation.

Conference rooms, classroom or auditoriums where a single controller is used to manage multiple devices such as projectors spread throughout a facility or to add additional ports to an AMX Central Controller.


  • Enable Ports over Ethernet – Provides a future proof solution to add ports anywhere
  • Easy to Program – Programming is identical to any other device ports on the Controller
  • Power over Ethernet – Eliminate the need for a power source at the install location
  • Small Form Factor – Compact design makes it easy to hide for a clean installation
  • NetLinx Studio Tools – Configuration tools make ICSLan Device Control Boxes easy to deploy


  • Standard, Ethernet-Based Interface – Familiar installation methodology using standard switches rather than proprietary distribution hardware
  • Easy to Program – Programming is identical to any other device port on the Controller
  • Easy to Install - Compact size, Power over Ethernet and compatible with any AMX Central Controller


  • Control Any Device – Provides the ability to control devices that may be far from a controller
  • Cost Effective Solution for Smaller Rooms – Leverage the power of a single central controller across multiple rooms
  • Out of Sight - Compact design makes it easy to hide for a clean, elegant look



  • 1" x 4 3/8" x 5 1/8" (2.5 cm cm x 11.1 cm x 13.00 cm)
  • RU: 1

1 lb (454 g)


  • PoE Powered - No local Power Supply needed
  • Typical power draw: 1.9 Watts
  • Max power draw: 2.4 Watts


  • Four IR / Serial control ports, 20KHz - 1.14MHz
  • Four input ports for sensing contact closure


  • 1 Green LED shows connection and power status
  • 1 Green LED shows Ethernet Link status and activity
  • 4 Red LEDs (1 per IR port) show IR transmit (TX) data activity
  • 4 Yellow LEDs (1 per input port) show input activity


  • 1 RJ-45 ICS-LAN Ethernet Connector
  • 1 8-Pin 3.5mm captive-screw terminal for I/R ports
  • 1 6-Pin 3.5mm captive-screw terminal for inputs


  • FCC Part 15 Class B
  • C-Tick CISPR 22 Class B
  • VCCI CISPR 22 Class B
  • CE EN 55022 Class B
  • CB Scheme IEC 60950-1
  • cULus UL 60950-1


    Price: 600,00 €, VAT excluded.


Created by Digiart