Products from AMX

NI-4100 (price: 3 350,00 €, VAT excluded)

 

OVERVIEW
The NI-4100 provides versatility with the ability to integrate the largest number of devices in the NI Series of Master Controllers, including projectors, lighting, DVD and Blu-Ray players, thermostats and other electronic equipment. In these technology-driven environments, this solution allows for the future addition of more devices and control capabilities. With a perfect mix of compatible formats, the NI-4100 offers flexibility and customization for businesses experiencing rapid growth and for homes that demand seamless integration of technology and design. The NI-4100 provides higher performance with a faster processor, 64MB of onboard RAM and Duet-compatibility.

COMMON APPLICATION
The NI-4100 is geared to meet the high-end control and automation requirements of the most sophisticated and complex commercial and residential installations.

FEATURES

  • 7 Configurable RS-232 / RS-422 / RS-485 Serial ports
  • 8 Relays
  • 8 IR / Serial ports
  • 8 Digital I/O ports
  • 3 Communication Networks: AxLink, ICSNet and Ethernet (TCP/IP)
  • 4 NetLinx Control Card Expansion slots that support all NXC control cards
  • 404 MIPS processor speed
  • 64 MB RAM or 256 MB RAM
  • 2 GB CompactFlash (upgradeable to 4 GB)
  • 1 MB Non-Volatile Memory
  • AMX Device Discovery enabled
  • JITC Compliant

SPECIFICATIONS

DIMENSIONS (HWD)

  • 5 3/16" x 17" x 9 5/16" (13.2 cm x 43.2 cm x 23.7 cm)
  • RU: 3

WEIGHT
9.15 lbs (4.15 kg)

POWER
900 mA @ 12 VDC

ENCLOSURE
Metal with black matte finish

MEMORY

  • 64 MB SDRAM (FG2105-06)
  • 256 MB RAM (FG2105-26)
  • 1 MB of Non-volatile SRAM

COMPACT FLASH
2 GB Compact Flash (upgradeable to 4 GB factory programmed)

ONBOARD MASTER
404 MIPS

CERTIFICATIONS
FCC Part 15 Class B, CE, and IEC 60950

FRONT PANEL COMPONENTS

  • LINK/ACT: Green LED blinks when the Ethernet cables are connected and terminated correctly. Also blinks when receiving Ethernet data packets
  • Status: Green LED blinks to indicate that the system is programmed and communicating properly
  • Output: Red LED blinks when the Controller transmits data, sets channels, sends data strings, etc.
  • Input: Yellow LED blinks when the Controller receives data from button pushes, strings, commands, channel levels, etc.
  • RS-232/422/485 LEDs
  • Relay LEDs
  • IR/Serial LED
  • I/O LEDs
  • NetLinx Control Card Slot 1 - 4
  • Rack-mount brackets: Provides an installation option for the Integrated Controller to be mounted into an equipment rack, when used with the Installation Kit (KA2105-01)

REAR PANEL CONNECTORS

  • RS-232/422/485 (Ports 1 - 7)
  • ICSNet: Two RJ-45 connectors for ICSNet interface (included)
  • ICSHub Out: RJ-45 connector provides data to a Hub connected to the Controller (included)
  • Relay (Port 8)
  • Digital I/O (Port 17)
  • IR/Serial (Ports 9 - 16)
  • Program Port
  • Configuration DIP Switch: Sets the communication parameters for the Program port
  • ID Pushbutton: Sets the NetLinx ID (Device only) assignment for the device
  • Ethernet Port: RJ-45 port for 10/100 Mbps communication. LEDs show communication activity, connection status, speeds, and mode information: - SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps. - L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
  • AxLink LED: Green LED indicates the state of the AxLink port
  • AxLink Port: 4-pin 3.5 mm mini-Phoenix (male) connector that provides data and power to external control devices
  • Power Port: 2-pin 3.5 mm mini-Phoenix (male) connector
  • CardFrame Number DIP Switch

ENVIRONMENTAL

  • Operating Temperature: 0° C (32° F) to 50° C (122° F)
  • Operating Humidity: 20% to 85% RH
  • Heat Dissipation (Typical): 36.9 BTU/hr

INCLUDED ACCESSORIES

  • 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
  • 4-pin 3.5 mm mini-Phoenix (female) AxLink connector (41-5047)
  • 10-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5107)
  • Two 8-pin 3.5 mm mini-Phoenix (female) Relay connectors (41-5083)
  • Two CC-NIRC IR Emitters
  • Two removable rack ears (62-2105-07)

 

 

(Click here for larger PDF image) 

 

    Price: 3 350,00 €, VAT excluded.

Back

Created by Digiart