7" Modero Touch Panels

NXD-700i (price: 2 995,00 €, VAT excluded)

NXD-700i

 

OVERVIEW
The NXD-700i is an incredibly versatile user interface, combining a sleek, compact size, Wall/Flush Mount flexibility and the ability to create a high quality digital home/office intercom network or to make/receive digital local, long distance and international telephone calls. Simply add the AMX Communications Gateway (FG2182-0x) for calls that sound incredibly clear.

COMMON APPLICATION
At just 7 inches in size, the NXD-700i is perfect for wall/flush mount control of a variety of devices in bedrooms, bathrooms, kitchens, podiums and other surface mount locations.

FEATURES

  • 7" active-matrix TFT with 16:9 Aspect Ratio
  • Screen Resolution (HV): 800 x 480 pixels with Anti-glare Overlay
  • Display colors: 256 K (18 bit color depth)
  • Full duplex VoIP Intercom and SIP Telephone (requires AMX Gateway) Ready
  • Built-in speaker and microphone
  • G.711 telephone-voice-quality sound (70 dB SPL @ 1 meter)
  • Supports analog stereo audio
  • 128 MB SDRAM / 256 MB CompactFlash Memory or more
  • Two bezels included: with and without tactile buttons
  • Motion Sensor and Light sensor

 

SPECIFICATIONS

DIMENSIONS (HWD)

  • NXD-700i (with faceplate): 5.93" x 7.87" x 3.28" (15.06 cm x 20.00 cm x 8.33 cm)
  • CB-TP7 Rough-In/Wallbox (optional): 5.47" x 7.23" x 3.40" (13.90 cm x 18.40 cm x 8.64 cm)

WEIGHT
1 lb (0.45 kg)

PANEL LCD PARAMETERS

  • Aspect Ratio: 16:9
  • Brightness: 300 cd/m2
  • Contrast ratio: 400:1
  • Display colors: 256K (18-bit color depth)
  • Dot/pixel pitch: 0.19 mm
  • Panel type: TFT Color Active-Matrix
  • Screen Resolution: 800 x 480 pixels (HV) @ 60 Hz frame frequency

ACTIVE SCREEN AREA
6.00" x 3.60" (15.24 cm x 9.14 cm)

VIEWING ANGLE
Up/Down/Left/Right: 70/60/70/70

IR RECEPTION ANGLE

  • Horizontal: ± 50° (left and right from center)
  • Vertical: ± 30° (up and down from center)

SUPPORTED AUDIO SAMPLE RATES
48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz, 11025Hz, and 8000Hz

INTERCOM
Full duplex VoIP capabilities

FRONT PANEL COMPONENTS

  • Light Sensor: Photosensitive light detector for automatic adjustment of the panel brightness
  • Motion Sensor (PIR): Proximity Infrared Detector to wake the panel when panel is approached
  • Front Bezel Button: Provides both access to the setup and calibration pages and toggles the panel between "sleep" or "wake" state. This button is also user-programmable.
  • Microphone: Frequency response of 300 to 3400Hz; used for intercom applications.
  • Speaker: Output of 4Ohm, 2 Watt, with a 300Hz low cutoff frequency

SIDE PANEL CONNECTORS

  • Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication. The Ethernet port automatically negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use half duplex or full duplex mode.

    Power is supplied through Power Over Ethernet (PoE).

    NXD-700i panels communicate with the NetLinx Master using the ICSP protocol over Ethernet.

    LEDs show communication activity, connections, speeds, and mode information:

    • L/A- link /activity - Yellow LED lights On when Ethernet cables are connected and terminated correctly and then blinks when receiving Ethernet data packets.
    • SPD-speed - Green LED lights On when the connection is 100 Mbps and turns off when the speed is 10 Mbps.
  • Mini-USB Connector: 5-pin Mini-USB connector used for programming, firmware update, and touch panel file transfer between the PC and the target panel.
  • The connector is also used for providing audio output for external speakers.

 

POWER REQUIREMENT

  • PoE Powered - No local power supply needed
  • Max power draw: 5.5W

CERTIFICATIONS

  • FCC Part 15 Class B and CE
  • IEC 60950
  • RoHS

MEMORY

  • 128 MB SDRAM
  • 256 MB integrated Flash Memory (not upgradeable - factory programmed)

ENVIRONMENTAL

  • Operating Temperature: 0° C (32° F) to 40° C (104° F)
  • Operating Humidity: 20% to 85% RH
  • Storage Temperature: -20° C (-4° F) to 60° C (140° F)
  • Storage Humidity: 5% to 85% RH

INCLUDED ACESSORIES

  • Installation Kit for NXD-700i panels (KA2258-02):
    • 4 Phillips-head screws (#4-40 x 0.250 Black) (80-0112)
    • 3 Drywall clips (62-5924-05)
    • 3 #6 sheet metal screws (80-0192)
    • Trim Ring with button openings (60-2258-26)
    • Trim Ring without button openings (60-2258-25)

OTHER AMX EQUIPMENT

  • NXA-RK7 Rack Mount Kit (FG2904-53)
  • CB-TP7 Rough-In Box (FG035-10)
  • PS-POE-AF PoE Injector (FG423-80)
  • CC-USB Type-A to Mini-B5-wire programming cable (FG10-5965)
  • USB to Headphone Adaptor (FG5966-23)
  • NXA-ENET8POE Gigabit PoE Ethernet Switch (FG2178-62)

 

Price: 2 995,00 €, VAT excluded.

Product Request

02.02.2012Back

Created by Digiart